In TimeTrak 4.0, Queues were added as a feature. A queue can be set so that queue data (jobs/tasks or clients and serviceable units (if they have a default job)) can be populated automatically by a SQL statement or these queues can be managed manually by users adding and removing items. For more information about queues, click here.
In TimeTrak 19.1, we have added to queue functionality by allowing this queue data to display in a timeline calendar.
This provides Schedulers with the ability to review the activity scheduled against these items and quickly schedule resources to the job/ task instead of our previous scheduling method of jobs/ tasks being scheduled to resources.
How to set up a queue calendar in TimeTrak
Note: The Queue that you want to see in the calendar, must be set up in the TimeTrak Administrator Console and enabled at the Profile level before it can be setup in a calendar.
Queues are useful if your Scheduler would like to review a list of jobs to be completed. For example, a list of the jobs with the due date of this week or a list of tasks for a long project, etc.
To enable a queue in a calendar, go to workgroup setting as per below:
Add new workgroup:
Ensure the “Owner” is assigned and “Calendar Resources” is set to “Queues”.
Once the calendar resource is set to “queues”, select the applicable queue as per point three below:
After the queue has been specified, select “Timeline View”. In the Schedule view dropdown, you can specify a colour against the workgroup which will display on the workgroup tab in your calendar.
In the roster dropdown specify a roster – this will set the default time range when double clicking on a day in the timeline view.
You will see all your visible workgroups in the Manage Workgroups screen including the queue you just added.
By default, a user’s visible workgroups will be ones where they are the owner of the workgroup or global workgroups (which are available to all users).
There is also the below profile setting which when enabled displays workgroups that belong to users in your TimeTrak groups.
As per the below example, Bridget also has access to Greg and “Daily Schedules” workgroup.
Back in the calendar, you will now see the new workgroup tab “In Progress” which is populated with the queues data:
The selected workgroups settings can be accessed and managed quickly by selecting the workgroup from the top left hand corner as per below (instead of accessing this information by the “Manage Workgroups” icon and selecting the applicable one from the list).
Add Resources Panel
Another new setting that complements queue data in timeline calendars is the ability to have a resource panel on the right panel. With this, you can quickly add resources against the jobs/tasks in the calendar.
As per example below, you can see there is no resource tab on the right panel.
To enable this feature, select “Calendar Settings” as per below:
Select the resource tab and enable “Show Resource Tab” as per below:
- If “Show Quick Add” is enabled users can create appointments quickly without the appointment screen loading (appointment defaults will be passed into the appointment).
- Resource Columns defines how may columns of users are displayed in the resource panel.
- Tab Order defines where in resource panel sits in your job/task/queue tabs.
After you have saved these settings then the resource tab will be available on the right panel in the position specified in settings with the amount of resource columns specified.
Groups can be minimised so that only users that are relevant will display. This view will cache to the users settings.
As per below, if the group “equipment” was of no relevance to the Scheduler, they could minimise this by clicking the minus icon as per below:
This collapses the resources in this group, as per below, so they are not available by default, these can be viewed again simply by clicking the plus icon:
This is great for customers who have large resource lists and only want to see a select group by default.
Show Conflicts
Adding to the resource panel functionality is the ability to display conflicts.
When this setting is enabled and a time period is selected, the resources that are already scheduled for this time period display with a red block beside them to indicate this.
This provides the ability to quickly see if any resources are available to be booked and who these resources are.
When this setting is enabled, there is still the ability to book these already scheduled users (as long as their profile has “Allow overlapping in calendar enabled”).
As per below, hovering over the user will display information of the conflicting appointment/ time entry so the Scheduler can make an informed decision prior to double booking the resource.
If the Scheduler would prefer not to have resources that are already scheduled display in the resource panel this setting can be disabled.
As per below, the number of conflicts will be displayed but the users that have a conflicting appointment will no longer be displayed in the resources list to be selected:
This same function is also available in the Appointment Screen as per below:
Hovering over the question mark icon will also display what the different colours and shapes indicate again to assist schedulers with whether or not they should be creating an overlapping appointment for the resource(s).
Default Day Scheduling
As mentioned earlier a roster is assigned to a queue work group.
In this example, the “In Progress” workgroup has been assigned to the “Default Roster”
The Default Roster is set as per below in the TimeTrak Administrator Console
When double clicking a day in the In Progress Calendar as per below, the time range specified in the roster is automatically selected:
This provides the ability to quickly create “full day” appointments for users from the timeline view.
Quick Add Appointment
As mentioned previously, if “Show Quick Add” is enabled against the resource settings users are able to create appointment(s) without the appointment screen loading.
In the below example, Bridget, David and Greg need to be scheduled against job #17 on Wednesday the 27th of March.
This can be done by double clicking Wednesday in the timeline view, selecting these three users from the resource panel and clicking “Quick Add” as per below:
This will create the appointments, as per below, if appointment category and statues are setup these defaults will be passed into the appointments.
Hide/Show Empty Calendar Resources
To further enhance the timeline queue scheduling, there is the ability to display only queue data, which has appointments or time entries against them in the current time line view.
In this example, only jobs 9,12,17 and 19 have appointments or time entries against them.
Users can right click and select “Hide Empty Calendar Resources” as per below:
Which will then only display the queue data (jobs in this example) that have appointments or time entries against them allowing schedulers to review data that has been scheduled instead of seeing data that is yet to be scheduled.
Users can simply right click and select “Show Empty Calendar Resources” to get all data in the queue back in the calendar view.
Timeline Settings
While timeline settings are set at a user level under Calendar settings in 19.1, there is also the added ability to save timeline settings against a workgroup as per below:
- Column count – This is the amount of columns that can be viewed within the timeline view. Note: there is a maximum of 100
- Visible Columns – This is the amount of columns that can be viewed within the timeline view without the need to scroll.
- Resource Label Width – This is the width of the resource label. Note: Resource label is the label that details the queue data. The data that displays in the resource label is the same data that displays in the queue itself. This data can be customised at a profile level as per this tip of the week.
- Range – This is the time range you wish to see in the timeline view.
- Visible Days – Select the days you wish to see in the timeline view
- Stack Calendar Items – See below
Stack Calendar Items
Stack Calendar Items is yet another setting to enhance timeline scheduling.
As per the rest of the timeline settings, this is available at a user level under Calendar Settings, as well as against individual timeline workgroups.
Scheduled items can be hard to view when looking at data on a day by day basis, see below example without Stack Calendar Items enabled:
If this setting is enabled as per below:
The view of the data changes, appointments and time entries are “stacked” in the order they occur the items also take up the whole column to try make these items more visually appealing.
When Stack Calendar Items is enabled, the default first line of the display data is the date range and quantity as per below:
When selecting “New Appointment” against a user in a timeline view set to “day view” where the user already has an appointment scheduled for the day, as per below:
By default, the appointments start time will be the time of the last appointment for that user in this case 12pm.
Time Scale Options
Many customers have the same workgroup configured with different time scale and column counts to view their data in different ways.
For example: If the user wanted to see the above “Service Team” data in more detail, they could change the time scale options by right clicking and selecting these as per below:
Timeline Scroll
Again, to enhance timeline scheduling, there is now the ability to “scroll” the time line.
As per the below example, the scroll bar is available down the bottom of the screen and the user can scroll out until the 3rd of April.
The scroll allows you to see up to 100 columns (this is defined in the workgroup timeline settings).
If there was a need to see further than the 3rd of April the time scales could be changed down to a day view which allows for more columns and provides the ability to scroll out to the 7th of August as per below:
Queue timeline scheduling against a job (project) but all time must come from a task.
Many of our customers use Tasks within TimeTrak as a way of breaking down “project” work against a job.
In order for this to work effectively there is a profile setting which can be enabled that requires users to assign all their time against a task instead of directly to a job.
These customers required the ability to schedule users directly against the job (project) using the above queue timeline view and resources tab.
This provides their account managers and schedulers the ability to schedule resources accordingly and review their resource capacity at a “project” level whilst users are still required to assign all time against tasks when the below two profile settings are enabled:
For more information on this feature click here.
Remove All Appointments
Remove all appointments allows Schedulers to remove all appointments against a job for a day.
To do this right click and select “Remove All Appointments” as per below:
The below pop up will appear; click “Yes” if you wish to continue:
This will delete all the appointments against this job for the day, as per below.
This is a helpful feature if clients call to cancel a job and the scheduler needs a quick way to remove all appointments for this day.
Group Scheduling Enhancements
Previously in TimeTrak 4.0, group scheduling was quite restrictive and “teams” of users would need to be setup as workgroups, however if these teams changed rapidly this was very hard to manage.
In TimeTrak 19.1 we have added linked and overlapping as additional types of scheduling.
Which type of group check-in behaviour needs to be specified at a profile level as per below:
The original “Workgroup” functionality is still available, for more on Workgroups click here.
When scheduling any appointments created at the same time these become “linked” appointments.
Appointments can then be added to at any time, for example is a Truck needs to be scheduled with the below group of users.
Any one of these appointments can be opened and the Truck or additional Resource can be selected in the resource panel as per below:
This will create a linked appointment for the Truck.
If the Scheduler then goes to delete David’s appointment (because he is sick)
The below pop up will appear, giving the option to delete just David’s appointment or the linked overlapping appointments also.
If I then add an additional appointment for Rebecca to attend this site on the same day (but a different time period, that overlaps the other user’s appointments) her appointment becomes an “overlapping” appointment.
It is not a linked appointment as it was created separately, however it is an overlapping appointment due to her appointment overlapping the other user’s appointments per below:
If the scheduler then goes to delete David’s appointment (because he is sick) the below pop up will appear providing an additional option.
- This appointment only: Delete only the selected appointment (David’s Appointment)
- This and 4 overlapping appointments: Delete all appointments that overlap (David, Scott, Troy, Truck and Rebecca’s)
- This and 3 linked overlapping appointments: Delete the selected appointment and the 3 linked overlapping appointments (David, Scott, Troy and Truck) as they are linked appointments.
As mentioned earlier, these appointment relationships are important for Mobile users when working in teams if they are completing time entries for their team members as the group check-in behaviour needs to be defined at a profile level.
If David’s Profile has the group check-in behaviour set to “linked” as per below:
And he checks into this appointment in Mobile, he is prompted to check in the resources with linked appointments (Scott, Troy and Truck) as per below:
However, if David’s profile has the group check-in behaviour set to “overlapping” as per below:
And he checks into this appointment in Mobile, he is prompted to check in the resources with overlapping appointments (Scott, Troy, Truck and Rebecca) as per below:
If David’s profile has the group check-in behaviour set to “None” as per below:
And he checks into this appointment in Mobile only he will be checked into the appointment, there is no prompt to check in other users.
If David’s profile has the group check-in behaviour set to “workgroup” as per below:
And he checks into this appointment in mobile the standard 4.0 workgroup behaviour will apply.
For more information on this click here.
Pin Linked Resources
Again to assist schedulers with managing group scheduling via our new scheduling method, there is the ability to “Pin Linked Resources”.
To do this, right click and select “Pin Linked Resources” as per below:
This will Pin the users from the “linked” appointments, as per below, the users pinned will be displayed at the bottom of the screen.
On appointment creation, these users are passed in by default as per below, providing schedulers the ability to create numerous linked appointments for a group of users quickly.
Set a Team Leader
Commonly businesses who schedule groups of resources identify these groups by a “Team Leader” or “Site Supervisor”.
To assist with this, there is now the ability to allocate a resource as a “leader”.
The team leader can be customised to “Team Leader” etc. to be more relevant as per below:
There are the additional profile settings as per below:
When a user is assigned to a profile with “Set as Leader when group scheduling” by default they will be set as the “Leader”.
To identify this in a timeline calendar, a profile short code and colour can be assigned to the profile as per below:
There is also the added ability to colour code appointments based on the “leader” colour to assist schedulers visually with group scheduling.
As per below, this is located in the appointment setup in the TimeTrak Administrator Console.
In this example, the leader colour is set as the appointment background colour.
This can be seen, as per below:
One set of appointments is orange due to David having orange set against his user in the TimeTrak Admin Console:
One set of appointments is pink due to Rebecca having pink set against her users in the TimeTrak Admin Console:
In Rebecca’s team, we can see that both her and Sarah are against a profile which is defined to “Set as Leader when group scheduling” meaning that either of these users have the ability to be the team leader.
If Sarah should be the team leader on this particular day, schedulers can right click on Sarah and select “Set as leader” as per below:
This moves Sarah to the top these linked appointments and changes the appointments to green which is assigned against Sarah’s user in the Admin Console.
This then clearly shows users that there are two groups scheduled to this job on the 28th, Sarah is the team leader for one group and David is the team leader for the other.
Download Whitepaper PDF